Separate names with a comma.
Hi there, We’ve made some tests with Movi Pro carrying a RED Komodo under the Alta X and we found several issues that we would like to solve. The...
Freely TB50 adapter for our movi pro arrived. We installed it but the TB50 battery don’t go in ON mode, so the movi have no power. The 4 lights on...
You can modify the length of the main cable.
There is any way to have telemetry from external uart on Altax with Crossfire?
Recently I tested U7 490 with 18" prop and Tmotor 80A esc . Reached 6Kg of thrust, 1600w, about 60A but the problem are the cable from motor to...
The frame is home made with 2 carbon plate 3,5mm The carbon tube are 32mm diameter The plastic block are printed in ABS with 3d printer The...
Testing new octo, with U7 490, T80A Tmotor esc. Esc temp is obout 50-60°c during flight, with peak of about 65 degree. [media] Payload: Gimbal...
Hi, what U7 do you use? 420 or 490? My 490 seem less reactive (with T80A). Wich setting do you use for the esc? Thanks
bench test without sync failure. With Tmotor 4114 have this issue on Maytech simonk Esc 60A (with 50A is ok) This setup havent sync issue. (I...
Hi Tested today my new Octo Coax Motor: Tmotor U7 490kv Prop: Xoar 17" Esc: Tmotor T80A 400hz Total weight: 13Kg Motor Temp after 3 min of...
The motor are 3x iflight 5208 and 1 8017 for pan
yes, Alexmos nnoard with 3rd expansion board. I reprinted all with ABS, now it support higher temperature. One more test: Now I think is...
[media] Next test is to put everything in the oven at 70° C
