Separate names with a comma.
Devin, If you are still having issues, the newest firmware offers the option to put in notch filters. At certain angular positions the BG can...
I have own and flown with the Naza 2, WKM and the A2....... so far I have never regretted moving forward from one to the next as the WKM was...
My WKM had over 150 excellent flights before I sold it and moved on to the A2. A2 has had 18 to 20 test flights, mostly for the 3 axis BGC.........
I am about to use them but in combination with the xt150 since the new batteries coming from Hong Kong for DJI S1000 and S900 are using the larger...
I've been flying DJI systems for a couple of years starting with the NAZA then moving up to the WKM then the A2..... All worked fine for me so far...
Mark..... I hear you..... I do Arc Flash studies on a regular basis as part of my Industrial Electrical Engineering work. Many electricians have...
http://www.abb-conversations.com/2012/11/what-do-arc-faults-and-air-bags-have-in-common/ Its a common problem in the Electrical Engineering...
Some new batteries coming out of China use the + red AX150 in combination with the - black XT150. Original manufacturer is AMASS. The combination...
You are correct.... Before the TDG regulations kicked in on LiPo battery capacity limits for airfreight some manufacturers were inclined to...
My mistake was using a 4008 Yaw BG motor. Despite the really light camera weight, i.e., GoPro3+ Black for testing purposes, the yaw motor has to...
I started with the S800 defaults for both Basic and Attitude gains, assigned a Futaba T8FG RD "volume" dial to both so I could adjust the FC gains...
kjetil tonnesen et al, Thought I should update you on the DJI A2 on my Cinestar 8.......... I flew it again in stronger wind and on the lee side...
Thanks.... got one of those - came with my larger 5208 Yaw motor to be installed on handheld gimbal to be later transitioned on to the Cinestar8....
Very good information.....I am thinking that might be the best option for now as continuous rotation would not be good for the wiring to FC thru...