/dist/images/branding/favicon
Separate names with a comma.
yes
The "Silent" folter contains a special software for with "no startup melody" after power on. It does only a short "beep". For this software only 8...
Hello Tuukka, if you read the user manual carefully the programming sequence is exactly described. A "reset" is a simple switch off and swith on...
Yes, these wires are directly connected to the main battery supply wires soldered on the board. They are especially for suppling the flight...
Hi, please use with KW12 or U7 ADV24 to be on the safe side. I will release in the next weeks a special software for the U7 Motors. Until then use...
Hi Tuuka, Herkules Okto-XL comes preprogrammed with PPM firmware, 16kHz and Timing ADV18. Each channel of the channels is programmed with a...
Hi, this is definitely no issue on the timing. It must be a hardware defekt. Either Motor, wiring to motor or one ESC channel is either wrong...
Hi guys, its me. ;) some clarification: 1) Herkules III current sensor interface to Mikrokopter: Herkules III measures internally the individual...
Hi Josh, pretty old thread but one remark: Kopterwork is NOT producing Anything. It is a reseller only! The Herkules controllers are produced by...
Hi Sedric, stumbled by chance across this thread. One short email to me and all of your questions would be answered! I am not able to read all...