/dist/images/branding/favicon

Red RCP cable & Red start/stop cable

Discussion in 'MōVI Pro' started by Tyler Oxendine, Jan 20, 2017.

  1. Alan Rencher

    Alan Rencher Member

    Joined:
    Sep 9, 2013
    Messages:
    39
    Likes Received:
    8
  2. AlexChailan

    AlexChailan Member

    Joined:
    Nov 11, 2016
    Messages:
    32
    Likes Received:
    1
    Hi Guys,

    I am with the 1.2.1 GCU and with the RCP red cable, I can control the camera but not start / record from the movibackscreen. I have a dragon, activated the Rcp.

    Other things, is it possible to switch the FPS and not the project framerate via the RCP ?
    Thanks !
    Alex
     
  3. AlexChailan

    AlexChailan Member

    Joined:
    Nov 11, 2016
    Messages:
    32
    Likes Received:
    1
    Update info, with the movicontroller I can start the recording, maybe i need to do something on the movi?

    Thanks
     
  4. Brandon Obey

    Brandon Obey Member

    Joined:
    Dec 27, 2016
    Messages:
    55
    Likes Received:
    7

    Are you using a Base Expander or the Jetpack Expander?
     
  5. AlexChailan

    AlexChailan Member

    Joined:
    Nov 11, 2016
    Messages:
    32
    Likes Received:
    1
    Hi Brandon,

    Thanks for your reply, I use the ctrl connector on the back of the Dragon DSMC1.

    Alex
     
  6. Brandon Obey

    Brandon Obey Member

    Joined:
    Dec 27, 2016
    Messages:
    55
    Likes Received:
    7

    U may need the Red Start/Stop Cable Freefly sells. Find the post Bryan Edmonds made in the thread where he talks about the Red Protocols.
     
  7. AlexChailan

    AlexChailan Member

    Joined:
    Nov 11, 2016
    Messages:
    32
    Likes Received:
    1
    Well, I don't understand because another guy on the thread explain that Freefly wont seel anymore the Red start/stop rec because the RCP do it.
    Via the movicontroller I can launch the rec, maybe it's not the same protocol as the movi backscreen ?
     
  8. Bryan Edmonds

    Bryan Edmonds Chief Mōvi Whisperer

    Joined:
    Jul 3, 2014
    Messages:
    254
    Likes Received:
    126
    It's not a cable issue. There's a bug keeping the REC button the GCU from working. It's been reported and will get fixed.

    You can change the FPS from the MōVI Controller, but not the MIMIC. There is already a feature request pending to have FPS (Not Project) adjustable on the MIMIC.
     
  9. AlexChailan

    AlexChailan Member

    Joined:
    Nov 11, 2016
    Messages:
    32
    Likes Received:
    1
    HI Brian,
    Thanks for your feedback, soundsgood !
     
  10. Guntram Fröbel

    Guntram Fröbel New Member

    Joined:
    Dec 5, 2015
    Messages:
    3
    Likes Received:
    1
    hello,

    i have a problem to connect my red epic with the movi pro. there is no contact.

    red epic firmware 6.3.102
    movi pro (gcu) v1.3.2 tsu v1.3.4
    red menue, serial : ctrl protocol: REDLINK Command Protocol is ok
    Movi Pro Red RCP cable

    Can you help me?

    thanks and best regards
    guntram
     
  11. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
  12. Guntram Fröbel

    Guntram Fröbel New Member

    Joined:
    Dec 5, 2015
    Messages:
    3
    Likes Received:
    1
    Hi Gary,
    this is my real name ;-).
    best regards
    guntram
     
    Gerfried Guggi likes this.
  13. Kevin jerome

    Kevin jerome New Member

    Joined:
    Oct 4, 2017
    Messages:
    2
    Likes Received:
    0
    Did you figure out the right pin assignment to make your own RCP cable?
     
  14. Alan Rencher

    Alan Rencher Member

    Joined:
    Sep 9, 2013
    Messages:
    39
    Likes Received:
    8
    The Red manual, and the Movi Pro manual both have pinouts in them.
     
  15. Kevin jerome

    Kevin jerome New Member

    Joined:
    Oct 4, 2017
    Messages:
    2
    Likes Received:
    0
  16. Alan Rencher

    Alan Rencher Member

    Joined:
    Sep 9, 2013
    Messages:
    39
    Likes Received:
    8
  17. AlexChailan

    AlexChailan Member

    Joined:
    Nov 11, 2016
    Messages:
    32
    Likes Received:
    1
    Hi Brian,

    Do you have any news for the fix ? it's done or still in dev ?
    Thanks !

    Alex
     
  18. Bryan Edmonds

    Bryan Edmonds Chief Mōvi Whisperer

    Joined:
    Jul 3, 2014
    Messages:
    254
    Likes Received:
    126
    Alex, the fix is coming for MōVI Pro in beta firmware v1.4. I believe testing is either wrapped or wrapping up shortly. The firmware should be available soon!
     
    SeBaStIaN BArrEtT likes this.
  19. AlexChailan

    AlexChailan Member

    Joined:
    Nov 11, 2016
    Messages:
    32
    Likes Received:
    1
    Good to know ! Thanks Brian :)
     
  20. Stephan Knight

    Stephan Knight New Member

    Joined:
    Apr 25, 2018
    Messages:
    7
    Likes Received:
    0
    I own the Epic-W With the Base I/O expander would I still need the longer version of RCP cable or will the short one do?
     

Share This Page