/dist/images/branding/favicon

Reset Movi without any app?

Discussion in 'MōVI M10' started by Justin Marx, Oct 22, 2013.

  1. Justin Marx

    Justin Marx Active Member

    Joined:
    Oct 3, 2013
    Messages:
    326
    Likes Received:
    26
    Is there anyway to reset the M10 without the app?
    I wanted to show someone and it's balanced to and Epic but I want to put the 5D on it
     
  2. Brad Meier

    Brad Meier Active Member
    Staff Member

    Joined:
    Aug 14, 2012
    Messages:
    749
    Likes Received:
    66
    Chances are the stiffness settings would be too high for the 5d. You would need the app to change that. But if you have a bluetooth device nearby (other than iDevice), load up the software and change it right there.
     
  3. Justin Marx

    Justin Marx Active Member

    Joined:
    Oct 3, 2013
    Messages:
    326
    Likes Received:
    26
    But not iPhone correct?
     
  4. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    No the software has not been ported to the iPhone yet.
     
  5. Brad Meier

    Brad Meier Active Member
    Staff Member

    Joined:
    Aug 14, 2012
    Messages:
    749
    Likes Received:
    66
    By iDevice I meant all the i's including iPad, iPhone..
     
  6. The App can currently be downloaded and used for Android Tablet with the latest OS(7" inch minimum size), PC, and Mac.

    The iPhone and iPad app will be available in the near future.

    Chris
     
    Brenda Neary and Justin Marx like this.
  7. Justin Marx

    Justin Marx Active Member

    Joined:
    Oct 3, 2013
    Messages:
    326
    Likes Received:
    26
    Gotcha.. I read it so quickly, I actually read it the wrong way..

    Thanks Chris!
     
  8. bevan goldswain

    Joined:
    Oct 16, 2013
    Messages:
    68
    Likes Received:
    18
    Hi Chris

    How near is the 'near future'

    I need to now whether I should be buying an android tablet or not. I dont want to get one only to discover the new app is out in a week.

    Thanks

    Bevan
     
    Anders Elgaard likes this.
  9. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Bevan it will be several more months based on the last information from Denise. Based on that post it would be in 2014.
     
  10. bevan goldswain

    Joined:
    Oct 16, 2013
    Messages:
    68
    Likes Received:
    18
    Thanks Gary... oh well I'll go and buy myself an Android then ;-)
     
  11. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,383
    Likes Received:
    1,164
    You need a 7" screen or larger, I was told. I just bought a Samsung Tab 3 (running the Android Jelly Bean release). I've not tested the app. with it. I did test it with a Samsung Note 10.1 and it works fine (but the Note is too big to cart around on location). You will need to tweak settings sometimes on location if you change lens (or zoom to a different length). It's worth taking the time to get the balance spot on.

    The current wisdom for a zoom like the Canon 24-105 is to balance for 70mm, but I found that if I set it wide to 24, then I would get some oscillations if I picked up the MōVI by the top handle.

    Andy.
     
  12. Fred Light

    Fred Light New Member

    Joined:
    Oct 30, 2013
    Messages:
    14
    Likes Received:
    2


    OK, it's 2014. Almost 2015. IPhone app????
     
    Graham Tolhurst likes this.
  13. Erik Estrada

    Erik Estrada New Member

    Joined:
    May 29, 2017
    Messages:
    2
    Likes Received:
    0
    Hello and good day to all, I just did the update of the firmware of my m10 this morning, but now when it turns on it does not stabilize and the 3 LEDs are flashing, I have reset the bootstrap cable but nothing happens either, alguine knows why it happened This and how to fix it, I'm from Mexico, thank you
     
  14. Andy Johnson-Laird

    Andy Johnson-Laird Administrator
    Staff Member

    Joined:
    Jul 31, 2012
    Messages:
    10,383
    Likes Received:
    1,164
    Erik: The "bootstrap cable" is intended to force the M10 into accepting a firmware update, so there's no such thing as a "reset the bootstrap cable."

    The correct use of the bootstrap cable is here: https://freeflysystems.zendesk.com/...-do-I-use-my-jumper-cable-to-recover-my-MōVI-
    I'd suggest you install the bootstrap cable and re-upgrade the firmware and see if that corrects the problem as the three LEDs flashing suggests that the gimbal controller is having trouble initializing.

    Hope this helps. Freefly is closed today because it's a national holiday.
    Andy

    Forensic Software & sUAV / Drone Analyst : Photographer : Videographer : Pilot (Portland, Oregon, USA): Trees=2, Ground=1, Props=11. :(
    The Ground Is The Limit™
    ---------- Forensic Drone Analyst : Forensic sUAV Analyst : Forensic Unmanned Aircraft Analyst : Forensic Drone Expert
     
    Chris Harrison likes this.
  15. Mohamed.moltoo

    Mohamed.moltoo New Member

    Joined:
    Sep 23, 2016
    Messages:
    1
    Likes Received:
    0
    Please
    Please I can't find the page it's can't open the link
     
  16. Bryan Edmonds

    Bryan Edmonds Chief Mōvi Whisperer

    Joined:
    Jul 3, 2014
    Messages:
    254
    Likes Received:
    126
    The instructions moved here.

    As noted in the article, you will need to submit a request to Support for the cable, as we stopped selling it in the store.

    Contact Support Here for Jumper Cable Requests
     

Share This Page