/dist/images/branding/favicon

Please help with my spektrum DX8

Discussion in 'MIMIC' started by Akpe Ododoru, Dec 13, 2016.

  1. Akpe Ododoru

    Akpe Ododoru Member

    Joined:
    Feb 14, 2015
    Messages:
    32
    Likes Received:
    2
    Hello everyone am quite new here and would really need your help

    I have a spektrum DX8 (2.4GHz DSM) that i use for my freefly movi m5
    The "Flap Gyro" stick which controls the "remote, Magestic and off" isn't working anymore.
    Is there a way i can set it up so the "Aux 2 Gov" stick controls these functions?

    Would really appreciate your help.

    remote.jpg
     
  2. Jason Smoker

    Jason Smoker Active Member

    Joined:
    Oct 23, 2012
    Messages:
    881
    Likes Received:
    70
    In the system set-up menu scroll down to "channel assign" you will see the channels assigned there then if you go to the next button down the button you can switch the flap to aux2. on the dx9 there assigned letters so it much easier but its the same process for memory
     
  3. Akpe Ododoru

    Akpe Ododoru Member

    Joined:
    Feb 14, 2015
    Messages:
    32
    Likes Received:
    2
    Thanks for the reply Jason
    the only options i have in the menu are-

    Servo setup
    D/R and Expo
    Differential
    Throttle Curve
    Flap System
    Mixing
    Range Test
    Timer
    Monitor

    EDIT
    I managed to find the "system set-up" menu, but there is still no "channel assign"
     
    #3 Akpe Ododoru, Dec 13, 2016
    Last edited: Dec 13, 2016
  4. Jason Smoker

    Jason Smoker Active Member

    Joined:
    Oct 23, 2012
    Messages:
    881
    Likes Received:
    70
    Sorry i just pulled out my old dx8 to have a look so when you power on the dx8 hold down the scroll button that will take you to system set-up then go to "SWITCH SELECT" then assign it that way. scroll down to aux 2 then change it from "Inh" to aux 1 or 2 and change your flap to "inh". you can check it working or not in the "Monitor" menu

    you probably have to go into the movi software to reassign it. afterwards

    see if that works
     
  5. Akpe Ododoru

    Akpe Ododoru Member

    Joined:
    Feb 14, 2015
    Messages:
    32
    Likes Received:
    2
    Thanks a lot dude, its working now.

    Really appreciate the assistance...thanks
     
  6. Jason Smoker

    Jason Smoker Active Member

    Joined:
    Oct 23, 2012
    Messages:
    881
    Likes Received:
    70

Share This Page