/dist/images/branding/favicon

MoVi M10 Gimbal

Discussion in 'Radian' started by Richard Unger, May 12, 2013.

  1. Bill Collydas

    Bill Collydas Active Member

    Joined:
    Nov 28, 2012
    Messages:
    528
    Likes Received:
    72
    If you use the 8khz rate they will whine but using the 32khz is silent.
    You can change it in the software.
     
  2. Janne Hoglund

    Janne Hoglund Member

    Joined:
    Oct 4, 2012
    Messages:
    364
    Likes Received:
    23
    The setting is there but is not rec to use, since you loose power :-(
     
  3. Janne Hoglund

    Janne Hoglund Member

    Joined:
    Oct 4, 2012
    Messages:
    364
    Likes Received:
    23
  4. Bill Collydas

    Bill Collydas Active Member

    Joined:
    Nov 28, 2012
    Messages:
    528
    Likes Received:
    72
    Is up to you. If you are working on a close set which sound is very important then use the silent mode, if you are outside and noise is no issue use the 8khz mode.
     
  5. Janne Hoglund

    Janne Hoglund Member

    Joined:
    Oct 4, 2012
    Messages:
    364
    Likes Received:
    23
    Is it that easy, I got the impression that you have to tune the pid settings after switching?
    Fabien says in his videotutorial that he does not advice to use it yet...
     
  6. Devin Nunns

    Devin Nunns New Member

    Joined:
    Jun 27, 2013
    Messages:
    2
    Likes Received:
    0
    I'm not an expert and I've never seen the M10 in person and I know someone from freefly even commented on here saying the motors were built by freefly but they look an awful lot like the Dualsky XM7015TE-5.5MR google the model number and you will see what I mean. That particular motor is 70mm in diameter which looks about right when I look at M10 pictures. So in my humble (ignorant) opinion I would not be surprised if they are using rewound Dual sky motors on the M10.

    And if they aren't Using the Dual sky motors (which is totally possible) I would say that if you wanted to build a gimbal for BIG cameras like RED with accessories or BMCC with big lens and accessories then then Rewound Dual Sky Motors will probably have the power. But like I said, I'm not an expert.
     
  7. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Devin they are not using Dualsky motors.
     
  8. Devin Nunns

    Devin Nunns New Member

    Joined:
    Jun 27, 2013
    Messages:
    2
    Likes Received:
    0
    It was worth a shot :)

    Thanks for the reply.
     
  9. Dmitry Kolomiets

    Dmitry Kolomiets New Member

    Joined:
    Jun 11, 2013
    Messages:
    10
    Likes Received:
    1
    We did rewound dualsky (70-s) motors (100 turns 0.28 mm USSR wire) it does work with red. Can not say about the quality but for my opinion U8 is better to be on pan...
     

Share This Page