Hey guys, sorry to be late coming to the party ... If you have an issue with the pan axis where the green LED flashes slowly (ie remains 'off') all the time, check that the 'Off unless using Spektrum' box is not checked. If it still will not work, I would suggest reading the config from another Radian, modifying the gains etc to be the pan axis then write this config to the Pan radian. It may be that you have somehow managed to corrupt a piece of internal config data.
Hi Edward: Based on what I've seen on the forum (and my own experience) there is no such thing as "recommended settings" -- the principal settings appear to be the gains -- those are sooo dependent on specific gimbals/camera combinations. The Max Rate is really a personal choice. The Angle trim is just adjusted to get the neutral position correct. And the Deadband is also a personal taste adjustment based on the kind of stick sensitivity you like. I wish there was a good recommended set of settings but, as Gary and I were discussing, we're dealing with experimental aircraft here and no two of them are alike. Andy
adjusted the BASIC gain 50 % and everything in order this is incredible Ajuste BASIC a 50% y esta todo en orden esta increíble Gracias. Gustavo, edward, andy
Hola Gustavo tengo las ganancias en 50 pero cuando hago paneo no lo hace parejo lo hace con pequeños brincos. Que electrónica usas en tu oktocopter Saludos Pd. De dónde eres
Enrique, eso me pasaba a mi, el paneo lo hacia con pequeños brincos y el sonido del servo era un poco mas fuerte que el de los otros servos. Desarmé el servo y lo volví a armar, ajusté la correa y el sonido es mucho mas suave igual que el paneo, se corrigió también el brinco que tenía. Lo único que observo es que cuando hago un paneo y lo detengo, el Gimbal se sigue moviendo un poco pero casi imperceptible, pero creo que no es lo correcto, debería quedarse quieto totalmente.
Gracias por la Gracias por la respuesta. lo curioso es que solo lo hace a la izquierda modificaste los valores en el radio
Hola Enrique, tengo electrónica Mk y servos Freefly, los cambié a sugerencia porque tenía Savox. Esos brincos pueden ser a causa del servo, al cambiar a FF se fueron. Gustavo.
Los trim en la radio los modifiqué pero no funcionó. La ganancia en el Paneo si la bajé bastante, a 10.
Gracias por sus respuestas, hoy tengo un vuelo les comparto el video. Thanks for replies, today I have a flight, I share the video Andy, Gustavo, Alberto
hola a todos. aqui esta el video, del primer vuelo con 360 ya con los tips, voló bien , pero estoy seguro que puede ser mejor. Hello everyone. Here is the video of the first flight with 360 already with the tips, flew well, but I'm sure it can be better.
No entiendo bien tu pregunta. Te felicito, excelente video. No está estabilizado en post, porque se vé demasiado suave. felicitaciones.
Si con el. Swich de tres pasos para activar los radián 1- desactivados 2- activados pero sin movimiento 3- activados con movimiento no parpadean igual los tres radians
Enrique not sure I understand the issue passing your thread through Google Translate. Are you saying that the Mode switch is not triggering all three of the Radians? If that is the case did you set the Mode channel on each of the Radians in the software? Can you please complete the form and paste it into your reply for Radian support. Form is at: http://forum.freeflysystems.com/index.php?threads/radian-issue-please-read-this-first.744/
Enrique. Los Radian de Roll, tilt y paneo, parpadean en swich 1 pero en el dos se activan roll y tilt pero no el paneo y en el tres no parpadea ninguno, quedan activados. Que ganacias tienes el el paneo, tilt y roll?
Hola ya tengo un video. pero el cliente no me permite subirlo o publicarlo, lo puedo enviar por correo. escriban sus correos y lo envio para que me digan cual es el problema Hello I have a video. but the client won't allow me to upload it or post it, I can send it by email. write your post. So tell me which is the problem enrique@miramevolarsinalas.com