hi to Radian development guys Is there any hope that someone will make some changes in software of Radian with Radian on Sbus for single pilot, and tilt and pan on channels 9 and 10 or 10 and 11, then when u switch on second pilots Spectrum/JR radio and the Sat Rx becomes active the radians still want the tilt and pan on ch 9 and 10 or 10 and 11 or what ever was programmed from the Single Pilot Radio Can u guys make some changes in Radian. so that if the Sat Radio is activated the Radians can be programmed to take any channel from Ch 1 to 4 to control Tilt and Pan. The problem is that even the top end Radios which do have option to link Ele and Ail or Rudd stucks to any channel the Exp part is not available, and is available on only ch 1 to 4 and one does want a very slow and smooth movement of Tilt and Pan with Sticks. So wondering any hope on this count OR has all attention shifted to Direct Drive Brushless systems Ramesh
Ramesh most radios allow for a secondary mapping of channels. Check your radio manual and see if this is supported.