Dear all, I'm new to Gimbal and never done a setup before. I got a like new Movi 15 few days ago. I refered some of the YouTube videos to do the setup. Completed the Tilt, Pan and Roll adjustment. But when I start the movi, it PAN towards right And after rotating around it's around 45 degree angle, it stops there. I also noticed, one of the LED, after the initial blinking, doesn't turn to GREEN. It goes OFF. Please see this video and help me to trouble shoot. Thanks Regards, Manoj
Align the Freefly logo (on the female toad-in-the-hole) using the four silver screws as a reference and then attach it to the male toad-in-the-hole with the logo facing you, turn it on (if it spins the opposite way; flip). The green LED is off to indicate the battery's power. No issue there.