/dist/images/branding/favicon
Separate names with a comma.
Yes, still waiting to hear back.
Looking to do it via the port on the M5 not via the receiver which is what the other thread seems to discuss.
No one?
Does anyone have any details of using the shutter control over the M5 AUX port with the GH3 or 4? I see the firmware supports this but cannot find...
Anyone looking for information on the Canadian Commercial UAV regulations can check out our blog. We have a number of articles there giving some...
Over and above the basic auto tune setting what is the suggested items to tweak for aerial use? We have done a couple test but notice a bit of...
How do you find the Triton when it gets further out range wise, say beyond 600' ? Does it degrade well at those distances? Ie is it still usable...
We gaffer tape the lever on ours to be safe.
You can disable the various alarms and warnings on the DX8 as well for each model.
If its not resisting at all I'd be fairly confident the issue is the disconnected cable. It seems to be a fairly common issue.
Yes in the box on the back. Sounds as if the cable is pulled out, easy fix however. You'll see the servo cable off or loose if it is the case.
Is you tilt motor working at all? Looks like it is just free floating. If you try and move it by hand on tilt does it resist? It could be your...
Anyone have any tips on balancing the BMPCC on the M5? it seems the problem is you cannot get it to the left enough to balance due to the small...
Never did get added, so requesting again. Thanks.
I'd like to be added to the conversation it it is still ongoing.
What are some general rates people are charging for out of town travel for aerial video work? Trying to nail down a rate that covers out needs but...
The numbers were meant more for the physical position, the actual software settings can be saved in a profile now and reloaded. So auto tune...
We are in the process of creating a custom cable cam for our own use with the Movi M5. Something to allow tighter areas, inside, etc where the...
Would there be any possibility of adding a pan limit to the M5 so as to prevent rotation beyond a certain amount? The reason I ask is we are...
Can you add me as well please.