Separate names with a comma.
Hi Ben, I have a Wedge that was not sold when I sold my M15 package. Complete with 1 Redrock motor and a bunch go Rec/Trigger accessories. Still...
Sorry Caleb. Only in kit.
Hi there, I'm selling a complete RTF system with an Alta 6, Movi M15 and Controller + Wedge. Either separated in Movi M15 / Alta or as a whole. Se...
This sounds interesting. How do you mean "powers the wedge"? The wedge gets power from the camera? Anyhow, I'm very curious on that...
We've been using the Redrock Torque motors for our Wedge system but found them inconsistent in their performance. We've have one failing in the...
Hi Ben, Curious in ways to optimize the Connex-system. Did I understand you right that you're using cloverleaf antennas on the Tx side and panel...
Last flight was in 13 degrees Celsius, 1000 AMSL, moderate winds around 4 m/s. Resulted in 8,20min on the 6000mah packs. 13.1 AUW
That is correct Stefan. At the moment, this was the only solution we found since Freefly don't support any triggering of the Alexa Mini through...
We are in the same situation. Been flying 10 000mah lipos and been wanting to get some more weight for camera+lens. Have flown both 6000mah and...
Whiteout Pictures / www.whiteoutpictures.com
We've been using these ones with good results. Just strip away the housing and put some heat shrink tube on it and you have a very lightweight...
We bought this cable last week and plugged it into a futaba receiver and are able to remote start/stop the Alexa Mini....
Hi, thanks for reaching out. The one thing we miss on our M15 while in-air is a stronger pan motor. We load it up with around 9 pounds of camera...
I second on this one. When flying fast sideways with a FS7 with Rokinon-lens, wedge and 1 focus motor, the pan motor fails to hold every time....
Thanks Derek for reaching out, The FS7 recognizes the lens. We use Canon EF with Metabones Ultrabooster and have iris-control via the wheel on...
Hi Derek, I'm having trouble getting the Iris to work also.. Would you mind giving me quick run through of settings to make the iris control...
Hi Derek, I second your questions about the Wedge+FS7 compatibility.. Trying to setup our wedge+controller with supplied LANC-cable with our FS7...