/dist/images/branding/favicon
Separate names with a comma.
I have a new gremsy H16 with a slip ring already built into it. Best settings I have found for the gimbal are with the motors on full hold...
I have just bought a Gremsy gimbal. It has a slip ring in the pan with a CAN link so it can talk to the wookong to correct for horizon drift, but...
it would be nice for the pilot to be able to switch from gimble to fpv camera with a tx switch while the gimble operator's monitor remains on the...
Im using a spektrum ar8000 and an orange RC receiver. They have a wire that can do Rec/ Zoom/ Iris/ focus on a sony FS7 with a 300g powerzoom OIS...
I believe you can buy 15mm carbon tubing on ebay for about $15 or so. That's what I've been using with no problems so far. I always carry a spare...
why not just have shorter booms and use the new 15.5 inch 3 blade KDE props instead of 17 or 18 props 2 blade props?
http://vertical.ai/blog/ these guys seem to have nailed it in my opinion
Not steadycam but similar results using easyrig + flowcine serene arm + 2 axis puppeteer combo from flowcine.com [media]
well that lens has optical image stabilizatoin which helped allot.. still possible in no wind with it turned off but i found it worked great with...
I regularly carry 18x 6 cell 99wh flight batteries, +5 gimbal batts+ quadcopter batts with no problem at all...so far! As long as you isolate them...
these look good! there is a V1 and V2 version and also a 30mm diameter version!...
I did a shoot in botswana using the gh4 and lumix 14-42 powerzoom lens controled by the gentwire pana2.5 cable. worked great. could zoom right in...
I had to fly at altitude the other day so retracts had to be stripped off to save weight. Just modified the peli that I use to carry my...
[media] Hello. hope the link works. I don't think the motors on my gimbal are cogging properly. (alexmos 32bit board) they have very little...
It looks quite bulky and a tad heavier than a red I think but still a good option..??? ...Anyone used it for aerial work yet??
Finally a camera that's been designed from the bottom up for use on octocopters! I'm hoping this will work with the lumix powerzoom lenses (unlike...
For those of you using the GH4, how do you remotely control aperture during flight? I currently fly the BMPCC which allows me to do this through...
Its a whole new frame rather than just a hinge add on. It's a 25mm tube skyknight frame. The 'hinges' are actually just bolts so you have to...
Just seen this on the web. with an efficient hexa or quad powered by for example, the new KDE motors, are current draws of 2C or less possible?.....