/dist/images/branding/favicon

Movi with Jeti Duplex ppm

Discussion in 'MōVI MR' started by Tomasz Patan, Nov 26, 2014.

  1. Tomasz Patan

    Tomasz Patan New Member

    Joined:
    Nov 26, 2014
    Messages:
    15
    Likes Received:
    0
    Hi.

    I see the latest Movi firmware supports Graupner RC which uses PPM signal.
    Has anyone tried Jeti Duplex with Movi?
    Will it also work with Jeti Duplex system(DS-16) and receiver that can output PPM signal for control?

    Thanks.
     
    #1 Tomasz Patan, Nov 26, 2014
  2. Florian Knobel

    Florian Knobel New Member

    Joined:
    Jan 25, 2015
    Messages:
    3
    Likes Received:
    0
    Hi,

    I also use the Jeti Duplex system and wanted to buy a Mövi M10.

    There is a workaround to connect an Jeti duplex receiver to mövi? To control the mövi m10 with an Jeti RC TX.

    Thanks for any answer from germany... ;)
     
    #2 Florian Knobel, Jan 25, 2015
  3. Tomasz Patan

    Tomasz Patan New Member

    Joined:
    Nov 26, 2014
    Messages:
    15
    Likes Received:
    0
    Hi Florian.

    So far i have not found a solution. Freefly support themselves do not know the system..
     
    #3 Tomasz Patan, Jan 25, 2015
  4. Florian Knobel

    Florian Knobel New Member

    Joined:
    Jan 25, 2015
    Messages:
    3
    Likes Received:
    0
    thats bad! :(

    Any good answer from the freefly team!? ;)
     
    #4 Florian Knobel, Jan 25, 2015
  5. Gary Haynes

    Gary Haynes Administrator
    Staff Member

    Joined:
    Jul 6, 2012
    Messages:
    5,211
    Likes Received:
    460
    Florian send an email to support@freeflysystems.com. Not sure anyone has worked with Jeti on the MoVI. But PPM should be PPM regardless of brand.
     
    #5 Gary Haynes, Jan 25, 2015
  6. Ryan McMaster

    Ryan McMaster Active Member

    Joined:
    Mar 8, 2014
    Messages:
    289
    Likes Received:
    40
    I just got a DC16 for piloting, Ill give it a go when I get home next week.
     
    #6 Ryan McMaster, Jan 25, 2015
  7. Florian Knobel

    Florian Knobel New Member

    Joined:
    Jan 25, 2015
    Messages:
    3
    Likes Received:
    0
    #7 Florian Knobel, Jan 27, 2015
  8. Tomasz Patan

    Tomasz Patan New Member

    Joined:
    Nov 26, 2014
    Messages:
    15
    Likes Received:
    0
    Any updates on this?
     
    #8 Tomasz Patan, Sep 8, 2015
  9. Tomasz Patan

    Tomasz Patan New Member

    Joined:
    Nov 26, 2014
    Messages:
    15
    Likes Received:
    0
    I got the M15 to work with my Jeti DC14 and R9 receiver.

    Used a servo cable to connect the receiver to sbus port on the movi then changed the receiver type to Graupner ppm in the configurator and R9 rx to output ppm negative via sat channel.
    This would probably work with any other Jeti duplex receiver that has the ppm out.
     
    #9 Tomasz Patan, Sep 15, 2015
  10. Derek Cooper

    Derek Cooper Active Member

    Joined:
    Apr 28, 2014
    Messages:
    527
    Likes Received:
    34

    How did you determine it needed to be negative? We've just moved over to Jeti and in learning mode.
     
    #10 Derek Cooper, Sep 17, 2015
  11. Tomasz Patan

    Tomasz Patan New Member

    Joined:
    Nov 26, 2014
    Messages:
    15
    Likes Received:
    0
    Both negative and positive works Derek.
     
    #11 Tomasz Patan, Sep 17, 2015
  12. Derek Cooper

    Derek Cooper Active Member

    Joined:
    Apr 28, 2014
    Messages:
    527
    Likes Received:
    34
    What is the difference between the two?
     
    #12 Derek Cooper, Sep 17, 2015
  13. Tomasz Patan

    Tomasz Patan New Member

    Joined:
    Nov 26, 2014
    Messages:
    15
    Likes Received:
    0
    "A PPM signal can come in one of two formats; Negative Shift and Positive Shift. This defines whether the positive or negative part of the signal carries the PPM timing pulse". This is the theory, don't know what that means in real life :)
     
    #13 Tomasz Patan, Sep 17, 2015
  14. Bernd Sprank

    Bernd Sprank New Member

    Joined:
    May 30, 2016
    Messages:
    3
    Likes Received:
    1
    just finished our M15 setup with JETI. I decided to stay with JETI as all our MR's are on JETI. Second reason if not main: The Movi Controller has Tilt/Pan on one Stick and our Cam Operators do not like this setup.

    Here are the finding and the options you can go for:

    1.
    Get a PPM capable JETI Receiver, switch it to either PPM positive or negative and set channels to 12 and the timing to 30ms!
    Set MoVI Receiver type to Graupner PPM, map your channels and your done.

    2.
    Get the DBus FW 3.24 for Jeti Receiver (in fact ist Futaba SBus) and flash the receiver, in the settings of the receiver switch it to UDI.
    Set MoVI Receiver type to SBUS, map your channels and your done.

    both options do work fine. the DBus FW is only working on the R type receivers not on the new REX Types. If you own them Option 1 is what you need to go for.

    PPM per spec. is running 8 CH with 20ms. If you want to use and map more then the framing has to be extended. 12 CH = 30ms (Standard with the Graupner GR24 on SUMO output)

    We are using CH1-7 for the MoVI incl. Shutter and the physical Servo outputs on the R9 for CH 8-12 for connecting other PWM based Stuff by mapping PIN output to the higher channels.

    Hope that clarify JETI usage on the MoVI.
     
    #14 Bernd Sprank, Jun 5, 2016
(You must log in or sign up to post here.)

Share This Page