Separate names with a comma.
sales@skyspecs.com
you try could contacting Skyspecs in Europe, there are looking for equipment
Hey Dave I will send you a email.
Freefly doesnt monitor this forum you would have to ask them directly
Adam are you talking about controlling the alta and gimbal on the same controller I dont think its possible. You will need a separate...
Adam, For the Futuba receivers its really personal choice. If you like to have quick look at the green light on the receiver to make sure your...
Yeah exactly. If you see where that cable comes out for Alta there are screw holes on the arm for a transmitter mount....
yeah that is the correct place remove that jumper cable and then make sure your connected to the app. Then go into the same config menu. move...
I know most of those cables are for FPV transmitters plug and play. The square is one goes into the back of the transmitter for a speaker I...
you need to remove the CONFIGURATION JUMPER cable to configure the drone. Please check page 38 of the manual...
cool build Josh
In Movi app go to "GENERAL" then GIMBAL APPLICATION change that setting to Airborne mode Its better to have the mode on three way switch 1)off...
the best way to do it is with a toad in the hole aerial kit and some landing gear. If you have some old cinestar landing gear ones they work also....
In the freefly app under the ABOUT part of it
3.6v is a good place to set your battery alarm. You do not push you battery lower 3.3v There are plenty of topics about it on the web
