Separate names with a comma.
I believe Red ships those with the leads marked.
The Red manual, and the Movi Pro manual both have pinouts in them.
You can contact us at sales@mediablackout.net for custom cables.
P-Tap connectors can actually handle a higher output current than one of those small 2-pin Lemo connectors (10A as opposed to 7A). IDX plates are...
If you are not burning out the glass fuse in the battery plate, then the power failure is most likely caused by tripping the battery's internal...
That's great to hear! Where do we download the API from?
We're doing a mod for a client of ours where we add lightweight locking connectors inside the tubes to allow the tubes to be swapped out. If...
Media Blackout Movi Pro Red RS cables can be configured to either protocol to work on any Red DSMC/DSMC2 system. They are available here:...
Media Blackout has an in-depth blog post on the new red protocol, and which expanders utilize it:...
https://mediablackout.net/products/movi-pro-cables The new Movi Pro from Freefly now features a Tilt Stage Unit that houses data and power...
Just a note, the Alexa Mini's EXT port can only supply 1A max, and it is possible to burn that board out by pulling too much power. For reference,...
Hi Jim, The pass-through port will pass the same polarity that you put into it. The polarity that Teradek uses (pin-1 GND) is actually more common...
Here it is, the BreakerBatt! [ATTACH] Power your SmallHD monitor from external sources while passing the power through to your Teradek Bolt!...
